| View previous topic :: View next topic |
| Author |
Message |
Latic Double Malt Member

Joined: 25 Nov 2016 Posts: 195 Location: Inverness
|
|
| Back to top |
|
 |
|
|
 |
Cuba Master Of Malts

Joined: 10 Aug 2010 Posts: 296
|
Posted: Thu Aug 17, 2017 2:40 pm Post subject: |
|
|
| I think most whisky drinkers know that adding water can have its pluses and minuses, as you say there is no right or wrong way, personally 99% of the time I take it as it comes out the bottle. |
|
| Back to top |
|
 |
davidbe Master Of Malts

Joined: 28 May 2015 Posts: 499
|
|
| Back to top |
|
 |
Forbes Double Malt Member

Joined: 10 Sep 2010 Posts: 191
|
Posted: Thu Aug 17, 2017 5:47 pm Post subject: |
|
|
| Quote: | | Though they didn't drink any whiskey during the study |  |
|
| Back to top |
|
 |
ralfy legend Master Of Malts

Joined: 25 Nov 2014 Posts: 968 Location: Fife
|
Posted: Fri Aug 18, 2017 6:26 am Post subject: |
|
|
| I've got to be honest I always add a drop because you just never know what it's going to release, on most I've been happy with the results,, but hey each to their own. |
|
| Back to top |
|
 |
opelfruit Master Of Malts

Joined: 19 Feb 2013 Posts: 1900 Location: Trapped inside this octavarium
|
Posted: Fri Aug 18, 2017 7:06 am Post subject: |
|
|
Master blenders dilute down to around 25-30% abv for this very reason, they can pick out more subtle flavours without the alcohol numbing the nose and palate. If you ask them how they actually drink their whisky for recreational purposes though then it won't be at such a low abv.
There is a trade off. You gain some and loose some. You gain nose and more subtle flavours but you will loose other flavours and most importantly you'll loose mouthfeel.
At 46% abv you reach something call maximum viscous synergy; it's the point where any ethanol/water mixture (whisky) reaches the point where it is the most viscous and the greatest mouthfeel. It's also the point where you don't have to worry about cloudiness with lack of chill filtration. 46% is a pretty special abv for whisky.
Dilute to 25% and whisky just ain't the same...... _________________ "Too much of anything is bad, but too much good whisky is barely enough." |
|
| Back to top |
|
 |
|

|
 |
Olorin Master Of Malts


Joined: 27 Sep 2015 Posts: 351 Location: Glasgow
|
Posted: Fri Aug 18, 2017 9:46 am Post subject: |
|
|
| opelfruit wrote: | Master blenders dilute down to around 25-30% abv for this very reason, they can pick out more subtle flavours without the alcohol numbing the nose and palate. If you ask them how they actually drink their whisky for recreational purposes though then it won't be at such a low abv.
There is a trade off. You gain some and loose some. You gain nose and more subtle flavours but you will loose other flavours and most importantly you'll loose mouthfeel.
At 46% abv you reach something call maximum viscous synergy; it's the point where any ethanol/water mixture (whisky) reaches the point where it is the most viscous and the greatest mouthfeel. It's also the point where you don't have to worry about cloudiness with lack of chill filtration. 46% is a pretty special abv for whisky.
Dilute to 25% and whisky just ain't the same...... |
I agree, when you water a dram down too much it loses a lot.. Body and mouthfeel are crucial to a whisky. I find some drams are better neat whereas others need a few drops. One example is Talisker 10, a lovely dram, but if I add water I find it unpleasant.
I am going to read the published paper I think... If anyone is interested it is freely accessible: https://www.nature.com/articles/s41598-017-06423-5 |
|
| Back to top |
|
 |
|